VoIP cabling

Voice over Internet Protocol is the technology that allows you to make calls directly from a dedicated device (computer, VoIP phone, smartphone, or other). It works by converting voice into a digital signal, delivering phone service over the Internet.

VoIP is a modern way to get a business phone number than a traditional phone line and works differently than a landline phone system. Instead of the circuit switching technology, VoIP uses the packet switching method, sending data over the line only when needed.

After the initial setup, a VoIP phone is assigned an IP address, upon which it uses a domain name system (DNS) to enable connection with other VoIP-enabled devices.

VoIP phones use one of two primary protocols to transmit voice calls over the Internet: the Session Initiation Protocol (SIP) or the H.323, both of which support voice and video transmissions.

VoIP phones let your business operate with an increased level of flexibility. Unlike traditional landline service, which ties employees to their desks to make or receive business calls, the VoIP wireless technology allows working from anywhere.

Additionally, choosing the VoIP technology for your business makes moving offices much easier since you don’t have to worry about changing business phone numbers or setting up a new physical phone system in your new location.

Two types of cables are used for VoIP: telephone wire and Ethernet cables. Each VoIP phone workstation should have Cat5, Cat5E, or Cat6 cabling installed with an Ethernet jack.

You don’t have to buy a new modem or router to use VoIP for your business. You can continue using the ones you already have.

Download the VoIP application on a suitable device, and you’re ready to start making and receiving calls. If your Internet connection isn’t stable and fast enough, consider upgrading to achieve enough bandwidth.

Many VoIP phones can be powered by the same Ethernet cable that connects to the unit through the technology that’s called Power over Ethernet (PoE).This is a great option for businesses because it reduces clutter and costs while packing power and data into a single cable.

However, not all VoIP phones offer PoE capability. Some require separate A/C adapters to power the unit.

Yes, you can use Cat5, Cat5E, or Cat6 cabling for your VoIP network. If you want to achieve a speed greater than 100 Mbps, the system installers should use the Cat6 cables.

Yes. Also, pass-through Ethernet is an option with most VoIP phones. You can choose to connect a device like your personal computer to your phone. This way, you only need to use one port on your router to connect two devices simultaneously.

Yes, you can use a VoIP phone with a stable Internet connection anywhere and on any device. Flexibility is one of the most attractive features of VoIP technology.

VoIP carries phone calls over the Internet instead of a landline. To do so, it should be connected to a modem or router using an Ethernet cable. VoIP phones connect to 8-pin RJ-45 jacks.

To use a VoIP phone system, you need a modem, a router (which is already a part of your Internet setup), and any device with the VoIP call software: a smartphone, laptop, or desktop computer. You can also make calls from a VoIP phone or VoIP headset.

Wireless adaptors allow you to connect to the Internet over a Wi-Fi network. All you need to do is place your VoIP phone’s wireless adaptors anywhere in the range of your Wi-Fi network.

By definition, VoIP technology is wireless. You can use VoIP with your desk phone or mount the device to a wall without cables.